TCL Sweeva 6000 Guia De Inicio Rapido página 9

4. Cleaning the UV Light
Clean the UV-C LED regularly by wiping it off with a soft, dry cloth.
Note: Turn off the robot vacuum's power before cleaning by holding the Power
button for 3 seconds.
5. Cleaning the Side Brushes
Turn the robot over, forcefully remove both side brushes , then use the cleaning
tool to remove hair and debris before reinstalling.
6. Cleaning the Roller Brush
Turn the robot over, press on both buckles to remove the brush cover, remove
brush from the right side, then clean the hair and debris from the brush using the
included tool before reinstalling.