Troubleshooting - Silhouette Select DIM3225BLSST Guia Del Propietario

You can solve many common Ice Maker problems easily, saving you the cost of a possible service call. Try the sugges-
tions below to see if you can solve the problem before calling the servicer.
1) The Ice Maker does not
2) The ice is not big
3) Ice Maker Alarming
4) Vibrations
5) Noise
6) Water leakage from
All manuals and user guides at all-guides.com

TROUBLESHOOTING

PROBLEM
operate.
enough or melts too
quickly.
ice maker.
POSSIBLE CAUSE
• Not plugged in
• The appliance is turned off
• The circuit breaker tripped or fuse has
been blown.
• The ambient temperature is too high.
• The door is opened too often.
• The door is not closed completely.
• The door gasket does not seal properly.
• Set the incorrect mode
• Too much dust on the condenser
• Outside water tank is full
• Not enough water
• Check to assure that the Ice Maker is
level.
• The rattling noise may come from the
flow of the refrigerant, which is normal.
• As each cycle ends, you may hear
gurgling sounds caused by the flow of
refrigerant in your Ice Maker.
• Contraction and expansion of the inside
walls may cause popping and crackling
noises.
• The ice dispensing during every cycle
may cause little noise
• The water flow noise during ice maker
normal operation;
• The Ice Maker is not level.
• The water inlet pipe in the back is too
loose
• The water outlet pipe in the back is too
loose
12