Image Adjustment; Focus Adjustment - WIMIUS T7 Manual Del Usuario

Image Adjustment

When using the projector for the rst time, it normally displays an
unclear image. This is due to the lens being out of focus or incorrect
trapezoid setting.
Please follow the below steps to correct:

Focus Adjustment

Place the lens perpendicular to projection screen and move the focusing ring to
sharpen the image until the image is clear. During the adjustment, you can play
shows or call up the menu for easy operation.
Focusing
Keystone
Move the rotary knob on the top of the projector until the image change
to be square. The image can be adjusted up to ±15 degrees. If the
keystone is still by moving the rotary knob to the limit position, please
shorten the vertical distance between the protector and the center of
the projection screen. In the way of table mount, you can change the
projection angle by adjusting the adjustable feet.
Keystone
S M OK
S M OK
Height
Projector
Screen
14
Screen
Porjector
Height
Height-feet
adjustment