Storing; End Of The Work; Dismantling The Tool And Disposing Of The Parts; General - CAMPAGNOLA C1 Manual De Instrucciones

7

- STORING

NOTE
Follow the maintenance instructions described above.

7.1 End of the work

• At the end of the work, remove the disc (7) and the grass and cutting residues. Lubricate the disc to prevent it from rusting.
• Remove the disc centring flange (17). Clean, dry and lubricate the disc housing (16).
• To clean the pneumatic motor (9), pour few diesel drops or spray graphite into the quick air plug (12) in the main handle. Make
the tool idle for a while.
8

- DISMANTLING THE TOOL AND DISPOSING OF THE PARTS

8.1 General

At the end of its working life, the tool must be dismantled.
The parts are to be divided up in order to dispose of them according to the material they are made of (metal, plastic, etc.) in
compliance with the regulations in force in the country where the tool is used.
23 - 56