Hohem iSteadyPro4 Manual De Usuario página 10

Gimbal Mode Button
Tap the button to switch
different working modes
with light on.
PF (Pan Follow)
Default mode, tilt & roll axis both locked,
camera is able to move to left or right
smoothly.
PTF (Pan & Tilt Follow)
Roll axis locked, camera is able to
move to left/right, and tilt up/down.
L (All Locked)
The camera stays in its current orientation.
POV (AlI Follow & Inception)
All Follow - Tilt axis, roll axis and pan axis
all follow the movement of the gimbal.
Inception - Hold the gimbal horizontally
and push joystick to left or right.
Long Press for 6 Seconds
Off-line Calibration
(Bluetooth indicator stays on)
It requires to calibrate the gimbal only
when you notice any kind of not level
or drift on any of the axes.
EN 06