Firmware Upgrade - Hohem iSteadyPro4 Manual De Usuario

Firmware Upgrade

Please make sure the gimbal is connected with the Hohem Gimbal app via
Bluetooth successfully, and upgrade to the latest firmware in the app.
FAQ
Q: Why does the gimbal vibrate after powering on?
A:
1. Make sure to mount the camera before powering on the gimbal.
2. For some lightweight action cameras, you need to reduce gimbal motor
power through the app (Hohem Gimbal - Setting - Motors options)
Q: Why the phone app cannot be connected with the gimbal via
Bluetooth?
1. Enable phone Bluetooth (Enable ONLY)
2. Turn on the gimbal
3. Launch Hohem Gimbal app
4. Select "iSteady Pro 4 "
5. Click "CONNECT DEVICE "
(Important! The Bluetooth has to connect in the app!)
*If the connection fails, please exit the app, restart the Bluetooth, follow the
above steps and try again.
Q: How to do if the gimbal is not level or drift after powering on?
A: Please refer to 'Calibration' for more details
EN 11