Checking Before Use - Dometic Travel Power 3.5 Instrucciones De Uso

Checking before use

9 Checking before use
!
WARNING!
Check the mechanical and electrical installation of the generator
and power thoroughly before turning on the ignition and using
Travel Power.
9.1 Mechanical control
➤ Check the generator and make sure that it is securely and irremovable
mounted on the engine.
➤ Check the pulleys and make sure that they are parallel and aligned.
➤ Make sure that the belt and the pulleys can run without obstruction.
➤ Make sure that the belt is tightened according to the manufacture's
instructions.
➤ Make sure that the belt has sufficient clearance in order not to damage
surrounding parts at large load changes.
➤ Check that the power box is mounted correctly:
– on a plane surface
– in a well-ventilated area
– protected against moisture
➤ Check that the openings of the power box are not covered.
9.2 Electrical control
➤ Make sure that all the wiring is done in a secure and correct way.
➤ Make sure that all cables are undamaged, unloaded, securely attached,
not rubbed or pinched in any way.
➤ Check that all cables are mounted and tightened in a proper way.
➤ Check that all connectors and socket screws are well tightened.
➤ Check that all appliances not intended for use are turned off or discon-
nected.
➤ Make sure that the earth connection is correctly installed.
20
Dometic Travel Power
EN