Temperature Control; Temperature Unit; Lighting; Display - Ambiano MD 37430 Manual Del Usuario

Temperature control

− Set the desired temperature (setting range for the temperature selection: 44 °F to
64 °F/7 °C to 18 °C).
− To raise the temperature, press the
16
button.
A signal tone can be heard every time a button is pressed.
The set temperature value fl ashes briefl y on the display, then the current temperature
inside the appliance is displayed again.
The energy consumption and the temperature inside the appliance can
increase at ambient temperatures outside the permissible range.

Temperature unit

To switch between the temperature units Celsius °C and Fahrenheit °F, press the
15
button and the

Lighting

− By pressing the

Display

− Press the
− Press any button to turn on the LED display again.

Tips on saving energy

The temperature setting may need to be changed in order to take these factors into
account.
− In order to achieve the best possible cooling performance while keeping energy
consumption low, observe the following:
− The cooler the set temperature, the higher the energy consumption.
− Do not set up the appliance near a heat source (radiator or kitchen stove, etc.).
− For the setup location, select a room that is not too warm and is dry, dust-free and
well ventilated.
− Ensure unobstructed air circulation around the appliance.
− Open the door for only a brief amount of time when storing and removing
beverages.
16
button simultaneously for about 3 seconds.
13
button, the interior lighting can be switched on and off.
15
button for 3 seconds to shut off the LED display.
Starting up the appliance
15
button and to lower it, press the
13