Transport; Troubleshooting - Ambiano MD 37430 Manual Del Usuario

Transport

1. Pull the power plug out of the power outlet.
2. Remove all bottles and the bottle trays from the appliance.
3. Screw in the adjustable feet completely.
4. Tape the door shut using adhesive tape.

Troubleshooting

Faults may occur when the appliance is in use. Use the following table to check whether
you can remedy the problem yourself. All other repairs are not permitted and void
the warranty claim. For those repairs, contact our Service Center or another suitable
workshop in case of fault.
Malfunction
The appliance does
not work.
The temperature is too
high.
The LED display is
switched off.
Problem
The electrical
circuit is interrupted.
The door does not seal
properly when closed
or has been opened too
frequently.
The appliance is dirty.
The appliance was set up
in a location where it is
exposed to direct sunlight,
or in a location next to a
heat source.
The power supply is
interrupted.
The control system is
defective.
Solution
− Check whether the power
cord is plugged in.
− Check whether the power
outlet is live. To do so, plug
in a different electrical
appliance (such as a table
lamp).
− Check whether the power
cord is damaged.
− Rearrange the bottles so
that the door can be closed
properly.
− Only open the door for a
brief time.
− Check the door seal.
− Clean the appliance.
− Set up the appliance in
another location.
− Set a lower temperature for
the appliance.
− Check whether the power
cord is plugged in.
− Contact the Service
department.
Transport
15