TensCare Perfect mama+ Instrucciones De Uso página 27

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Environmental specifications:
Operating:
Storage:
TYPE BF
APPLIED PART
IP22
Note: The electrical specifications are nominal and subject to variation from
the listed values due to normal production tolerances of at least 5%.
Note: At least 30min required for the device to warm / cool from the minimum
/ maximum storage temperature between uses until it is ready for intended
use.
Temperature range: 5 to 40⁰C
Humidity: 15 to 93% RH non-condensing
Atmospheric pressure: 70 kPa to 106 kPa
Temperature range: -25 to +70⁰C
Humidity: Up to 93% RH non-condensing
Equipment providing a degree of protection against
electric shock, with isolated applied part.
This symbol on the unit means "Refer to Instructions for
use".
The unit is not water resistant, and should be protected
from liquids.
Complies with EU WEEE regulations
26

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido