Troubleshooting Guide - Listo LVC 49L2B Manual De Utilización

I
f the applIanCe Is not Used for a long perIod of tIme
Unplug the appliance.
1.
Turn off the water supply tap on the appliance and disconnect the water supply
2.
hose from the tap.
Drain the water from the inside of the water supply hose.
3.
Remove the main filter and blot up any standing water in the filter compartment.
4.
A malfunction may be due to a minor problem that you can solve yourself using the
instructions in the following table. Before calling a technician, please perform the
following checks:
Problems
The programme won't start.
The dishwasher doesn't fill
with water.
The water is not drained at the
end of the cycle.
The dishwasher is noisy.
V.1.0

TROUBLESHOOTING GUIDE

Possible causes
Check that:
The dishwasher is connected to the mains.
•
There is not a power cut.
•
The water supply valve is open.
•
The dishwasher door is properly closed.
•
You have pressed the "Start/Pause " button.
•
Check that:
The water supply valve is open.
•
The water supply hose is not bent or obstructed.
•
The filter inside the water supply hose is not
•
clogged.
The water supply pressure is not too low.
•
Did you open the door before the programme
•
cycle was complete?
Are the filters clogged?
•
Check that the spray arm does not touch the
dishes.
54