Top Panel Features - DJ-Tech DJ For ALL! Manual De Instrucciones

4. Audio Configuration (For MAC) (Shown below in Mac OSX 10.6): Go to "Applications"
"Audio Midi Setup": (For other versions of Mac OS please refer to the Help of Audio MIDI setup to
→
perform the setup)
1. Click the "+" button to add an Aggregate
Device
2. Check the boxes to use the Amplink (USB
Sound Device) and Built-in Output
3. Open Deckadance and click "AUDIO" for
Audio setup
5. Go to SETUP page of Deckadance LE and enable the INPUT and OUTPUT of DJ For ALL (or "USB
Audio Device"
D. Top Panel Features
Rear Panel
1. Kensington Lock - Standardized connection for theft
protection.
2. Power Connector - Plug in power adaptor here. DC
adaptor can be used when the USB port cannot
provide enough power to the unit. Please use only a
6V DC adaptor.
3. Power Switch (Adaptor / OFF/ USB power) - Set the
switch to adaptor when using external DC adaptor. Set
to USB bus power when using power from the
computer via USB.
4. USB Socket - Used to connect a computer.
5. C.F Curve Control - Adjusts the shape of the crossfader curve from a quick cut for scratching or to a
longer fade for mixing.
All manuals and user guides at all-guides.com
4. Select "Aggregate Device" for Audio Interface
5. Select "Internal Mixer" for Outputs
6. Select the Built-in Sound (output 1 & 2 ) for
Headphones output and Amplink (output 3 & 4)for
Main output . You may have to swap the selection for
Headphones and Main if they are reversed. Please
refer to Deckadance Manual for more information.
4
→
1 2 3 4 5
"Utilities"