nutz Swagga Studio Guia Del Usuario página 3

SWAGGA STUDIO
Welcome to SWAGGA STUDIO Headphones.
Thank you for choosing SWAGGA STUDIO as your new Premier Headphone.
By using 50mm RST(Reverse Sound Technology)drivers, we recreate sound as the music artists intended
it to be heard.
This innovative technology provides the highest quality of rich bass and precise mid and treble sounds that will
allow maximum enjoyment of your Nutz product.
SWAGGA STUDIO is a high performance premium on-ear headphone.
We use genuine sheepskin leather to make our headband and earcups.
This manual will tell you everything you need to know to get maximum enjoyment and performance from your
SWAGGA STUDIO Headphones.
1. STUDIO Carton Contents
1. STUDIO 2. Gold-plated 3p
Headphones 4.0m curl code cable(w/o mic)
3. Gold-plated 4p 1.2m cable(with mic) X 2
2. Using your STUDIO Headphones
•Using your headphones correctly will help ensure that their performance reaches its full potential.
First, identify the left and right ear pieces.
Identification legends are engraved inside of the headband.
This is illustrated in Diagram 1.
•Now unfold the headphones and slide them on to your head with the headband adjusted so that each earpiece sits
comfortably over the ear.
This is illustrated in Diagram 2.
•You can also adjust the direction of earcups. 90degree left side and 90degree right side.
This is illustrated in Diagram 3.
•It is recommended that you fold and return your headphones to their case when not in use.
This is illustrated in Diagram 4.
Diagram 1 Diagram 2
Identfying left and right. Adjusting the earpiece.
L R
3. Connecting your headphones
Your STUDIO Headphones can be connected to any
audio device with a 3.5mm jack headphone output with 2.5mm/6.3mm adoptor jacks.
•Choose the 1.2m cable or 4m curl cable under your circumstances.
•Connect the cable plug to the left side earcup as Diagram5 ①.
•Twist and lock the cable as Diagram5 ②.
•When you disconnect the cable, twist the cable in the opposite direction and pull out.
4
All manuals and user guides at all-guides.com
5.Manual 6. pouch
User's
SWAGGA STUDIO
Guide
7. Gold-plated airplane jack
8. Gold-plated 6.3mm
/2.5mm stereo adaptor jacks
Diagram 3 Diagram 4
Adjusting the earcups. Folding the headband.
You can listen music together with other person by Sharing Jack on the rightside of the earcup.
The Sharing Jack is not a twist locking method.
4. Using your STUDIO Headphones with Smartphone.
Your STUDIO Headphones incorporate a combined microphone and audio control,
integrated within the remote and mic cable, that enables you to make or
answer calls while wearing the headphones.
The control also enables you to play, pause and skip songs.
The microphone and control is illustrated in diagram 6.
The control incorporates click switch, and operates as follows:
•Click the switch once to answer a call.
•Click the switch once to end a call.
•Click the switch once to play or pause a song
•Click the switch twice to skip to the next song.
•Click the switch three times to skip to the previous song.
5. Cleaning your STUDIO Headphones
•Clean your STUDIO Headphones with a soft cloth and leather cleaner.
•Do not rub the cloth on the leather hardly.
•Do not use cleaning detergents or leather polish, doing so may cause damage to the product.
6. Trouble shooting
If there is no or intermittent audio, low volume or poor audio quality, Sound is only coming from one earcub, Check as follow,
•Make sure that the headphone plug is securely twisted and connected to the device's headphone socket.
•Make sure that the headphone plug connection is not obstructed by any protective case used on the device.
•Make sure the volume level of the audio source is turned up.
•Disconnect and re-connect the headphones to ensure the connection is secure.
•Try an alternative audio source.
•Polish the plug surface with dried cloth.
•Use the extra supplied cable.
7. Safety warnings
•When unplugging the headphones never pull on the cable. Always grasp and pull the connector.
•Long-term exposure to loud music may cause hearing damage. It is best to avoid high volume levels when using
headphones, especially for extended periods.
•Use caution when using your headphones while operating a vehicle or engaging in any activity that requires your full
attention.
•Do not drop, sit on, or allow the headphones to become wet.
Technical Specifications
Model SWAGGA STUDIO
Drive units 2x ø50mm RST （ Reversed Sound Technology） speakers
Impedance 16 Ω
Frequency range 10Hz ~ 20KHz
Distortion (THD) <0.3% (1KHz/10mW)
Max. input power 50mW
Sensitivity 100dB/V at 1kHz
Inputs and Outputs Gold-plated 3.5mm stereo jack
Cable length 4m curl cable 1ea, 1.2m flat cable 2ea
Finish Sheepskin leather and Stainless Steel
English
Diagram 5 - Twist locking.
1X
1X
2X
3X
Diagram 6
The microphone and audio controls.
5