VMI URBAN Manual De Instalación Y Mantenimiento página 25

Once paired, follow the app's process to enter the settings
required to complete the set-up.
• Surface area and height of the area to be ventilated
▪ Air renewal selection
• Preheating température
• Max. supply air temperature
• Filter life
Once these settings have been defined, the
control unit and sensors (where applicable) must
be paired.
- To do this, simply add a device.
- Scan the QR code on the device to be added.
- Enter the room where the device is installed.
Sensors can be added after installation. To do so,
simply log in to the VMI® unit again via the app,
select the SENSOR tab and follow the procedure
described above.
Once the devices have been added, enter information about the end customer to create the
warranty document.
Recommendations
The end customer's email address must be entered if you wish them to receive it automatically.
Once the information has been entered, the warranty document is generated automatically and is
sent to Ventilairsec, to your company and to the end customer (if their email address has been
entered).
Commissioning of the VMI® is complete.
Any new login to the VMI® LINK PRO app enables installers to change the installation settings, add
sensors and access maintenance details.
1- Equivalent to 0.35 volume/h (for new houses)
2- Equivalent to 0.50 volume/h (ideal for renovations)
3- Equivalent to 0.60 volume/h (vulnerable persons)
25