TFA 35.1150 Instrucciones De Uso página 15

TFA_No. 35.1150_Anleitung 21.09.2018
SEASON – Wireless weather station
10. Atmospheric pressure
• The relative atmospheric pressure in hPa (or inHg) and the graphic development of the last 24 hours will appear on the dis-
play.
11. Weather forecast symbols
• The weather station has six different weather symbols (sunny, slightly cloudy, cloudy, rainy, stormy and snow).
• The weather forecast relates to a range of 12 to 24 hours and indicates only a general weather trend. For example, if the
current weather is cloudy and the rain symbol is displayed, it does not mean the product is faulty because it is not raining.
It simply means that the air pressure has dropped and the weather is expected to get worse but not necessarily rain.
• The sun symbol also appears on a starry night.
• The landscape picture changes with the seasons.
Spring: 20th March – 20th June
Summer: 21st June – 20th September
Autumn: 21st September – 20th December
Winter: 21st December – 19th March
Note:
Please note that the forecast symbol will become more defined in the course of operation. The forecast symbol is active right
from the start, however, the reliability of the forecasts increases with the amount of data collected.
12. Moon phase
• The moon phase of each day is shown on the display:
New moon Waxing Half moon
gibbous (first quarter)
28
10:15 Uhr Seite 15
Waxing Full Moon Waning Half moon
crescent crescent (last quarter)
SEASON – Wireless weather station
13. Setting of the alerts for temperature and humidity
13.1 Set outdoor temperature alert
• Press and hold the ALERTS button in normal mode.
• LO ALERT appears on the display and OFF (default) flashes.
• Press the + or – button to activate the alert function.
• -40°C (default) or the last adjusted lower temperature limit appear on the display.
• Confirm with the ALERTS button.
• The alarm value flashes.
• Press the + or – button to set the desired lower limit.
• Confirm with the ALERTS button.
• HI ALERT appears on the display and OFF (default) flashes.
• Press the + or – button to activate the alert function.
• 60 °C (default) or the last adjusted upper temperature limit appear on the display.
• Confirm with the ALERTS button.
• The alarm value flashes.
• Press the + or – button to set the desired upper limit.
• Confirm with the ALERTS button.
• Set the upper and lower limits for the outdoor humidity, indoor temperature and indoor humidity in the same way.
• Temperature range outdoor: -40...+60°C, temperature indoor 0... +37 °C, humidity 10...99% rH
13.2 Alarm event
• In the event of an alarm, the corresponding symbol will be flashing and an alarm tone will sound.
• Stop the alarm tone with any button. The alarm symbol will continue flashing until the measured value is again within the
alarm limits.
14. Positioning and mounting of the base station and the transmitter
• The base station can be placed onto any flat surface with the 3-step foldable leg found at the back of the unit. Press firmly
with both thumbs until the stand is properly locked in place and a click is heard.
• The base station can be wall mounted at a chosen location by the mounting holes found at the back of the unit. Make sure
Waning
to avoid the vicinity of any source of interference such as computer screens, TV sets or solid metal objects.
gibbous
29