Publicidad
Idiomas disponibles
Idiomas disponibles
44 07 01 07/13 / 04.08 / VA
Packing list: 1 Cable set
1 Socket
1 Socket retaining plate
1.
Disconnect the earth lead from the battery.
2.
Remove both rear lights and remove rear bumper side parts.
In order to connect the cable set with the socket remove partially foil from bumper's corners and take out the foam
3.
being behind them.
4.
Connect the cable set in the following way:
a) Lay the end of cable set with metal terminal into the space described in point 3 from the boot outside and
through the hole near the socket mounting point.
b) Draw attached socket retaining plate over the end of cable set (if necessary use anti-friction agent),
c) Disassemble the socket and connect cables according to the following assignment:
7 pin
Function
Indicator left
Fog light
Earth
Indicator right
Tail light right
Stop light
Tail light left
Fog light
13 pin
Function
Indicator left
Trailer fog light
Rear fog light
Earth
Indicator right
Tail light right
Stop light
Tail light left
Reversing light
Trailer current supply
Charge line plus
Charge line earth
Not assigned
Earth (trailer)
5.
Push the socket with rubber retaining plate and screw the socket tightly onto the retaining plate using the supplied
nuts and screws:
a) Pay special attention to the right position of rubber retaining plate,
b) Put the cable set gently to avoid any folds and to secure it from possible wiping.
6.
Bring the end of cable set marked R through the side hole to the right tail lamp, disconnect the tail light connector.
Connect 6-way connector from cable set with tail lamp and join both other connectors together.
Electrical Set for Trailer Connection
Part no.:
7-pin
Part no.:
13-pin
3 Screws M5X35
3 Nuts M5
3 Spring washer
Installation instruction
Contact description
Cable colour
1
(L)
black/white
2
(54-G)
grey
3
(31)
brown
4
(R)
black/green
5
(58-R)
grey/red
6
(54)
black/red
7
(58-L)
grey/black
8
(58-b)
grey/white
Contact description
Cable colour
1
black/white
2
grey
2a
grey/white
3
brown
4
black/green
5
gray/red
6
black/red
7
gray/black
8
blue/red
9
red/blue 2,5mm
10
yellow 2,5mm
11
white/brown 2,5mm
12
13
white/brown 2,5mm
005-138
Citroen Jumper van, bus manufactured 03.94 - 02.02
Fiat Ducato van, bus manufactured 03.94 - 02.02
Peugeot Boxer van, bus manufactured 03.94 - 02.02
013-358
Citroen Jumper van, bus manufactured 03.94 - 02.02
Fiat Ducato van, bus manufactured 03.94 - 02.02
Peugeot Boxer van, bus manufactured 03.94 - 02.02
2
2
2
2
4 Cable ties 300 mm (only in 13-pin version)
8 Cable ties
1 Sheet-metal screw
1
2
6
7
3
5
4
8
Contact description in
7-pin socket
8
9
7
1
10
6
2
4
3
5
11
12
13
2a
Contact description in
13-pin socket
Publicidad
