bosal 013-358 Instrucción De Montaje página 4

7. Bring remaining end of cable set through the side hole to the left tail lamp, disconnect the tail light connector.
Connect 6-way connector from cable set with tail lamp and join both other connectors together.
8.
Connect brown (7-pin), brown and white/brown cables (13-pin) to the earth point (possibly mount during
installation of left rear light).
9.
Reinstall both rear lights.
10.
Trailer power supply:
Refer to 13-pin version only. 3-pin connector housing (red/blue, yellow, and white/brown cables) is provided for
expanded socket functions. Put this part of cable set behind the trim. To expand socket functions it is necessary to
order the following parts:
Function "current supply and earth"
Function "current supply, charge line and earth"
Secure the cable set with supplied cable ties, re-install all trims and other parts which were removed during
installation.
Connect the earth lead to the battery and check all vehicle functions with connected trailer or suitable testing
device.
part no. 014-169
part no. 015-069