IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE
Thank you for choosing a Sanus Component Series Rack. The CFR21 series is designed to support audio/video equipment.
The total weight capacity for the CFR21 series:
CFR2115 226.8 kg (500 lb)
CFR2127 340.2 kg (750 lb)
CFR2136 385.5 kg (850 lb)
CFR2144 453.6 kg (1,000 lb)
Each 3U shelf supports up to 36.3 kg (80 lb), each 2U shelf supports up to 22.7 kg (50 lb), and each 1U shelf supports up to 13.6
kg (30 lb).
CAUTION:
Avoid potential personal injuries and property damage!
Do not exceed the stated weight capacities.
Do not shake, tilt, rock, sit, stand, or climb on your Component Series Rack. Tipping may cause injury or death.
Do not move large racks by yourself; due to weight and height, assistance is required.
Use extreme caution when moving a loaded rack! Push, DO NOT pull, loaded rack slowly over a short, smooth, level
distance. Avoid sudden starts and stops to minimize the strain placed on casters.
Do not use this product for any purpose not explicitly specifi ed by manufacturer.
If you do not understand these instructions, or have doubts about the safety of the installation, assembly or use of this
product, contact manufacturer Customer Service or call a qualifi ed contractor.
Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
NOTE: Due to continuous product improvement, images shown in this manual may vary from actual product.
Tools
Supplied Parts and Hardware
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the
damaged item to your dealer; contact Customer Service. Never use damaged parts!
Supplied parts are located inside of the rack. To access the parts:
1.
Remove side panel to access key.
2.
Insert key into door lock and turn clockwise; pull door handle out and turn counter clockwise.
3.
Open door and remove supplied parts.
1
[02]
4
English
2
3
6901-002133 <00>