Publicidad
4
Verify the Grounding Strap has been Installed
5
Install Fan for Additional Ventilation
8
If the grounding wire has not been installed, install the
wire now by attaching one end to the door ground stud,
and the other end of the ground wire to the ground stud
on the bottom of the rail.
CAUTION: Avoid damage to your components due to overheating. Make
sure that there is adequate space between each unit for proper airfl ow.
Operating temperature inside the rack must not exceed 104°F (40°C).
To install fan:
Remove the vented panel. Remove any metal burrs that remain in the panel
frame. Mount the cooling fan using the screws preinstalled in the top. For a
second fan, remove the adjacent solid panel and add fan.
OPT
6901-002133 <00>
Publicidad
