Beko BHCB 91632 X Manual Del Usuario página 15

5 Installation of appliance
5.5 Installation of the hood to the
chimney
Make the electrical connection of your hood before
starting the installation of the Chimney . Slip the
Chimney plates around the body.
Install the Chimney plate to the Chimney fasten-
ing plate that is secured to the wall from its upper
outer edges (Figure 7).
(Figure 7)
1. Inner chimney
2. 3.5x9.5 screw
3. Chimney connection plate
Cooker Hood / User Manual
5.6 Installation of air baffle
While using with the carbon filter, air baffle is pro-
vided with your appliance with the aim of re-re-
leasing the air which is cleaned with carbon fil-
ter from the perforated located on the Chimney .
Assemble the air baffle as below.
(Figure 8)
There is a tab in the middle of the Chimney con-
nection plate. Place the middle point of this tab on
the line that is drawn perpendicular to the wall.
Align horizontally and mark the holes where the
connection plate will be mounted via a pen (Figure
8/A, B).
Drill the marked points with Ø6mm drill and in-
sert two Ø6mm plastic dowels in the drilled holes
(Figure 8/A, B).
Fix the Chimney connection plate to the wall with
3.9x22 screws (Figure 8/A, B).
For air baffle assembly, install point C, D, E, F with
Ø6mm drill and Ø6mm plastic dowels (Figure 8).
(Figure 9)
1
2
15 / EN