Parts And Components; Operation - cecotec CONGA POPSTAR 2000 WET&DRY Manual De Instrucciones

1. PARTS AND COMPONENTS

Fig. 0
1. Handle
2. ON/OFF switch
3. Air outlet (blow)
4. Air inlet (vacuum)
5. Casters
6. Base
7. Dust tank
8. Lock system
9. Power adapter
10. Power cord
11. Top cover
Fig. 21.
1. 2-position suction base (hard floors/carpets)
2. Accessory for liquids
3. Accessory for fabrics
4. 2-in-1 accessory for furniture and corners
5. Vacuuming hose
6. Metallic telescopic tube

2. OPERATION

When vacuuming dirt/dust, first pour water into the barrel. The water level must be within
the maximum and minimum level mark.
Install the top cover and close the lock system.
Fig. 10.1.
Connection
Insert the hose into the air intake duct. To do this, slide the intake duct cover, insert the tube
and press until it clicks into position.
Fig. 11.
To remove it, rotate and pull out the hose.
Fig. 12.
Fitting the extensible metallic tube and accessories
Fig. 13.
Fitting the metallic extensible tube
ENGLISH
POPSTAR 2000 WET&DRY
25