Initial Start-Up - Nedo SIRIUS 1 HV Manual De Instrucciones

Structure
Control panel of the IR remote control
The button symbols and functions correspond to
the comparable buttons on the control panel of the
SIRIUS 1 HV, see page 12.
Exception:
"Send" LED display
Briefly lights up when buttons 4, 5 or 12 are
13
Flashes as long as buttons 1, 2, 3 or 6 are
Initial Startup
SIRIUS 1 HV
When starting the SIRIUS 1 HV rotating laser up for the first time, charge the integrated set of
rechargeable batteries (4.8 V) using the charger supplied. The charger socket is located below
the handle, behind a rubber cap. While charging, the LED lights up red on the charger, when a
fault occurs, the LED flashes red. The set of batteries is fully charged when the green LED on
the charger lights up.
Important!
Only use the charger supplied.
IR remote control
Insert the 2 batteries supplied (type AAA) in the IR remote control.
Ensure pole direction is correct!
Receiver
Insert the supplied batteries into the receiver.
Ensure pole direction is correct!
Starting up the unit
When using on site, set up the SIRIUS 1 HV according to the application.
Operating Instructions SIRIUS 1 HV Rotating Laser
All manuals and user guides at all-guides.com
pressed.
pressed.
13
EN
13