Nedo SIRIUS 1 HV Manual De Instrucciones página 14

Self-levelling
The SIRIUS 1 HV has a self-levelling feature.
This self-levelling feature is switched on by
pressing the ON/OFF button. The horizontal beam
(H) starts to rotate and the plumb beams (L
L ) are switched on.
2
If the unit is placed in a slanted position of up to 5°
in any direction, the laser beams are plumb and
horizontal.
If the 5° range is exceeded, the horizontal beam
stops rotating and starts to flash together with the
two plumb beams (L and L
1
Specifications
Model
Ref. No.
Laser configuration
Rotational speed
Scan angle
Levelling accuracy
Levelling time
Thread
Working range
Wavelength
Laser class
Output
Self-levelling range
Power supply
Battery life
Charging time
Operating temperature
Class of protection
Dimensions
Weight
Model
Range
Power supply
Dimensions
Weight
We reserve the right to make technical changes without notice.
Operating Instructions SIRIUS 1 HV Rotating Laser
All manuals and user guides at all-guides.com
and
1
).
2
SIRIUS 1 HV
471940 / 471940-632
1 laser dot, rotating from 0° to 360°
– 1 laser line due to rotating laser dot
– 1 scan array (limited line), see scan angle
1 plumb point upward and downward
0, 60, 120, 300, 600 rpm
0°, 6°, 20°, 50°, 90°
± 0.1 mm/m
< 30 sec.
BSW 5/8" on unit
300 m (diameter) with receiver
635 nm
2 / 3R
< 1 mW / < 5 mW
±5° to the horizontal and vertical axis, motorised
Set of NiMH 4.8 V rechargeable batteries, including charger
Battery capacity approx. 3800 mAh
approx 30 h
approx 5 h
–20 °C to +50 °C
IP 65
B 150 mm / D 200 mm / H 190mm
2.3 kg
Infrared remote control
Approx. 25 m
Batteries: 2 x 1.5 V (AAA)
B 46 mm / D 24 mm / H 111 mm
0.07 kg
EN
14