Central Brush; Lateral Brush; Anti-Fall Sensors And Charging Terminals - SPC BAAMBA GYRO PRO SUCTION 4400 Manual De Instrucciones

EN

4.3 CENTRAL BRUSH

2. Remove the central brush to clean it with the brush;
pay special attention to the bearings, because they can
1.Remove the cover that holds the roller.
accumulate dirt that prevents them from moving freely.
Use the cleaning brush included in the box.

4.4 LATERAL BRUSH

Remove and clean these brushes regularly, because hairs tend to tangle inside, forcing the motors
that turn them to overheat when a certain number are trapped.The warranty does not cover faults
arising from this cause.
Lateral brushes

4.5 ANTI-FALL SENSORS AND CHARGING TERMINALS

Clean the anti-fall sensors and charging terminals regularly with a cotton cloth to ensure they work
correctly.
Charging terminals
Anti-fall sensors