Skoda TRUNK GRILLE Instrucciones De Montaje página 13

All manuals and user guides at all-guides.com
Trunk grille
The accessories are intended for professional fitting. ŠKODA AUTO recommends that they are
fitted by a contractual partner.
Please note: The trunk grille can only be fitted in five-seater ŠKODA
KODIAQ vehicles.
Once the trunk grille has been fitted in the luggage compartment, it
will no longer be possible to fold the rear seat backs to the position
furthest back, otherwise the seat back will hit the grille. This must
be pointed out to the customer before the trunk grille is fitted, as it
does not constitute grounds for a complaint.
Component index for the trunk grille set (Fig. 1)
Component
Trunk grille
M8 rivet nut
Adapter (for inserting into the opening in the body
underneath the C-pillar trim)
Adapter (for inserting into the opening in the
roof side panel)
Cover cap (for fitting onto the C-pillar trim)
Cover cap (for fitting onto the roof lining)
M8 bolt
Template (for marking where the hole is to be drilled
in the roof lining)
Template (for marking where the hole is to be drilled
in the C-pillar trim)
Fitting instructions
Note:
If the rivet nuts are ever lost, you can order more from the ŠKODA Original Accessories
catalogue using part number 5L6 071 754.
List of special tools
Drill bit (26 mm diameter) for drilling holes in the roof lining – MTX 9-193/B.
Hole saw bit (25 mm diameter) for drilling holes in the C-pillar trim.
Riveting tool for riveting rivet nuts (B) (in the holes in the roof side panel underneath the roof
lining and in the holes in the body panel underneath the C-pillar trim) – MTX 9-295, 21 mm
open-end wrench, no. 10 Allen key.
Tool for screwing in adapters (C, D) - M8 x 50 bolt, M8 nut with washer, 13 mm open-end
wrench.
Pin, suction device.
Quantity Item
1
4
2
2
2
2
4
1
1
1
A
B
C
D
E
F
G
H
J
13
EN