Installation; Before You Begin; Tools And Parts Needed; Parts Included - Bosch NEB 36 Manual De Instrucciones

Installation

Before You Begin

Tools and Parts
Needed

Parts Included

Overall Dimensions

Cabinet Requirements

English 2
All manuals and user guides at all-guides.com
1. Phillips Head Screwdriver
2. Jigsaw
3. Scissors
4. Tape Measure
5. Aluminum Tape (for solid surface countertop installations only)
1. Foam tape
2. Hold down brackets (4)
3. Clamping Screws, #10-32 x 2 1/2" (63.8 mm) (4)
4. Sheet Metal Screws, #8 x 3/8" (9.5 mm) (4)
5. Washers (4)
If parts are missing or damaged, call the number or write to the address listed
inside the front cover.
The cooktop's overall dimensions are:
• Width 36" (91.4 cm)
• Depth 21-1/8" (536.9 mm)
• Height above countertop: 1/4" (6.35 mm)
• Overall height: 3-5/8" (92.58 mm)
CAUTION:
heated surface units, cabinet storage space located above the surface
units should be avoided. If cabinet storage is to be provided, the risk can be
reduced by installing a range hood that projects horizontally a minimum of 5 in.
(127 mm) beyond the bottom of the cabinets.
This unit is designed for installation in the countertop with zero clearance to adja-
cent walls and projecting surfaces constructed of combustible materials. A 30-
inch (762 mm) minimum clearance is required between the top of the cooktop and
Cabinet Bottom
(Unprotected)
Building Back
the bottom of an unprotected cabinet. A 24-inch (610 mm) minimum distance is
necessary when the bottom of the wood or metal cabinet is protected by not less
than 1/4 inch (6.35 mm) of a flame retardant material covered with not less than
To eliminate the risk of burns or fire by reaching over
30" min.
Wall
(762 mm)
Cooking
Surface
Building Side
Wall
Figure 1: Cabinet Requirements