Electrical Connection; Shelf Holders - Electrolux ERP 34900 X Manual De Instrucciones

Electrical connection

Before plugging in, ensure that the voltage and
frequency shown on the serial number plate
correspond to your domestic power supply. Voltage
can vary by ±6% of the rated voltage.
For operation with different voltages, a suitably sized
auto-transformer must be used.
The appliance must be earthed.
The power supply cable plug is provided with a
contact for this purpose.
If the domestic power supply socket is not earthed,
connect the appliance to a separate earth in
compliance with current regulations, consulting a
specialist technician.

Shelf holders

Your appliance is equipped with shelf retainers that
make it possible to secure the shelves during
transportation.
To remove them proceed as follows:
Move the shelf holders in the direction of the arrow,
raise the shelf from the rear and push it forward until
it is freed and remove the retainers.
All manuals and user guides at all-guides.com
The Manufacturer declines all responsibility if
the above safety precautions are not observed.
- 87/308 EEC of 2/6/87 relative to radio interference
- 73/23 EEC of 19.2.73 (Low Voltage Directive) and
- 89/336 EEC of 3.5.89 (Electromagnetic
This appliance complies with the following
E.E.C. Directives:
suppression.
subsequent modifications;
Compatibility Directive) and subsequent
modifications.
A
B
C
19