Tabla de contenido
Publicidad
The system may be "Disarmed" by one of 3 methods:
RFID Disarming: Approach the vehicle with the Remote Control
1)
...... 2-5 meters ..........
RFID must be "On"
- Once the Remote control is 2-5 meters from the vehicle the alarm will Disarm.
2) Remote Control Disarming:
Upon Disarm: • The siren will chirp twice.
• The parking lights will flash twice.
• The doors will unlock.
• The starter interrupt will disengage.
• The LED Status Indicator will turn "Off", or begin flashing rapidly
if the Automatic Rearming feature is programmed on.
3) Emergency Override: (Disarming the alarm without the Remote)
Step 1:
With the system in the armed condition, enter the vehicle via the driver's
door
(be aware that the alarm will activate when the door is opened)
Step 2:
Using your key, turn the vehicle's ignition to the "On" position.
Step 3:
Within 20 seconds, enter your PIN code (1-12) by Pressing the Valet/
Override Switch. (i.e.: if pin code is 8, press valet switch 8 times)
-The activated system will disarm one second after code is entered.
All manuals and user guides at all-guides.com
Disarming the Alarm
CHIRP TWICE
(see page 2)
Press & Release the Button on
THE SIREN WILL
CHIRP TWICE
Emergency Override
Page 4
THE SIREN WILL
THE DOORS WILL UNLOCK
(IF CONNECTED)
the Remote Control
THE DOORS WILL UNLOCK
(IF CONNECTED)
(4 chirps if alarm has activated & reset)
(4 times if alarm has activated)
(If an optional interface is connected)
THEN WITHIN
20 SECONDS
THE PARKING LIGHTS
WILL FLASH TWICE
THE PARKING LIGHTS
WILL FLASH TWICE
.
ENTER PIN-CODE
Publicidad
Tabla de contenido
