How To Program Features; Programmable Features - Omega K9-Sombra Manual De Instrucciones

There are 10 programmable features which are explained in the following pages.
To access Features Programming Mode:
Step 1: Turn the vehicle's ignition "On" then "Off".
Step 2: Within 10 seconds of turning the ignition "Off", press the Valet Switch 5
times. The siren will chirp once confirming entry to Features Programming Mode.
Step 3: Within 7 seconds of entering Features Programming Mode, press the
Valet Switch the number of times equal to the number of the feature to be
programmed. The siren will repeat the feature number with chirps to confirm.
Step 4: After the system acknowledges the feature to be programmed, press
the button on the remote control to turn the feature On (the system's response
will be 1 chirp), or OFF (the system's response will be 2 chirps).
- To program more features, simply repeat Steps 3 and 4. If 7 seconds expire
without any programming activity, or if the ignition is turned On, the alarm will
automatically exit Features Programming Mode. The siren will confirm exit.
The system has 10 programmable features which allow the system to be
customized to suite many individual needs. The following pages provide a brief
explanation for each feature, and notes its factory default setting.
Note: Once the feature to be programed is selected, you can toggle the
feature between its settings by pressing the button on the remote control.
• = Default Factory Setting
1. Pin Code: ( 1-12 , • Default 1 press)
- Allows user to program a pin code between 1-12 presses of the Valet/
Override button for use in Emergency override situations.
a. Enter Features programming mode and select feature #1.
b. Within 10 seconds slowly press and release the remote control's button
a number of times equal to the desired override pin-code, (The siren will
chirp every time the remote's button is pressed to confirm that its entry
was registered).
c. 4 seconds after the last press of the remote control's button, the siren
will chirp the pin code to confirm the number that has been entered.
d. User can program another feature by pressing the Valet button to select
next feature to be programed (step 3).
All manuals and user guides at all-guides.com

How to Program Features

Programmable Features

Page 9