Valet Mode; Led Status Indicator - Omega K9-Sombra Manual De Instrucciones

Valet Mode can be entered to only when the alarm is Disarmed.
Valet Mode turns off all of the alarm's security features, (including Anti-Carjack).
Valet Mode is designed for situations in which it is not convenient for the alarm
portion of the system to be operational; for example during extended stopovers
for vehicle servicing, loaning others your vehicle, maintenance, valet parking,
washing, etc. The convenience features such as keyless entry will still operate.
To Enter Valet Mode (System MUST be Disarmed):
Press & Hold the Valet Switch for 3 Seconds.
- The siren will chirp and the LED Status Indicator will light solid Red to con-
firm Valet Mode. Now the system cannot become armed.
The vehicle's ignition may be "On" or "Off" when entering Valet Mode.
To Exit Valet Mode: Simply Press & Release the Valet Switch.
- The LED Status Indicator will turn off to confirm that the system has exited
Valet Mode and returned to a "standby" mode. Normal arming operations may
be resumed.
Again, the vehicle's ignition may be "On" or "Off" when exiting Valet Mode.
The Red LED Status Indicator visually shows the status of the system and also
provides a high level of visual deterrence. The Red LED Status Indicator Light
is normally mounted in a location where it can be easily seen by the driver, as well
as from outside the vehicle.
Security System Status: The primary function of the Red LED Status Indicator
Light is to indicate the normal operating status of the security system:
Off = The system is disarmed and not performing any automatic functions.
On Constant = The system is in the Valet Mode.
Flashing Slow = The system is fully Armed.
Flashing Fast (while Disarmed) = Last Door Arming or Automatic Rearming.
Flashing Fast (while Armed) = The alarm has been triggered.
Automatic Transmitter Verification: For the first 90 seconds after the vehicle's
ignition is turned "On", the LED Status Indicator will flash a number of times equal
to the number of remote control transmitters which are programmed to operate
the alarm. This indication can be from 1 Flash /pause up to 3 Flashes /pause, as
the system can be operated by just one, or as many as 3 remote transmitters.
All manuals and user guides at all-guides.com

Valet Mode

The LED Status Indicator
Page 7