Technical Data - Oras Electra 6220F Guía De Instalación Y Mantenimiento

All manuals and user guides at all-guides.com
INSTALLATION AND MAINTENANCE GUIDE

Technical data

Working pressure:
Flow-rate at 300 kPa:
Hot water:
Noise class:
Protection class:
Electrical connection:
Afterflow:
Max. flow period:
Pressure loss:
General
These installation and maintenance instructions introduce the installation, servicing and use of the
touchless Oras Electra faucet. Please read the instructions carefully prior to installation and save
them for reference where servicing may be needed. If any fault or malfunction occurs in the faucet,
please seek the best possible advice at an expert HVAC store.
Versions
Oras Electra 6220F versions:
– Version with temperature adjustment handle, factory default (figure 1).
– Version for preset temperature (figure 2).
– Version for pre-mixed water (figure 3).
Changing to preset temperature version
– Detach parts 1, 2 and 3.
– Position the temperature adjustment handle (2) in place and adjust the temperature as desired.
– Put the plug (5) in place of the temperature adjustment handle.
Changing to pre-mixed water version
– Detach parts 1, 2 and 3.
– Unscrew the flexible hot water pipe (4). Note! left-hand thread.
– Screw the plug (6) in place of the pipe!
– Put the temperature adjustment handle (2) in place and turn it anti-clockwise (cold position) until the
limitation.
– Put the plug (5) in place of the temperature adjustment handle.
Cleaning
Cleaning of the external faucet surfaces should be carried out using neutral (pH 6-9), liquid cleaners.
Scrubbing or corrosive agents must not be used.
100 – 1000 kPa
0.1 l/s
max. 70 °C
l (ISO 3822)
IP 67
230 V
1 s
2 min.
200 kPa at flow of 0.1 l/s
P H 6 - 9
n e u t r a l
(figure 4)
(figure 5)
9