Module Configuration - Vimar ELVOX EMC.W Guía Rápida Para El Instalador

EMC.W

Module configuration

To configure the module, connect to the Wi-Fi network generated by the module and access the configuration page by
entering the following IP address in the browser address bar:
192,168.1.1.
The state screen will appear
State screen in Access point mode:
Access point Station
Current configuration:
Mode: Access Point
SSID: Vimar_D33A50
BSSID: 00-07-80-D3-3A-50
Channel: 11
Security: Open
Parameter Description
Module operating mode:
Access Point:
the module acts as HTTP and TCP server. It is possible to connect directly to the module, e.g. via a
Smartphone. The module is not part of a previously existing network.
Mode
Station:
The module acts as HTTP and TCP client. The module connects to an existing network and,
according to the modem/router configuration, can be seen anywhere inside or outside the local
network via the Internet.
Access point:
SSID
Station:
Access point:
BSSID
Station:
Channel Access point:
Access point:
Security
To use the module with the Wi-Gate app, you must configure the module as an Access Point (default setting).
To select the connection settings, connect to the Wi-Fi network generated by the module and access the configuration
page. Click on "Access Point" to view the module configuration pattern in Access Point mode
VIMAR group
P1
x n
Name of Wi-Fi network generated by the module.
Wi-Fi network the module is connected to
Module Mac address.
Mac address of router on the network the module is connected to
Communication channel used by the module
Security used for Wi-Fi communication
DL4
DL1
DL5
JP3
DL1 DL4
DL5
JP3
DL1 DL4
DL5
JP3
State screen in Station mode:
Access point
Current configuration:
Mode: Station
SSID: Vimar_D33A8C
BSSID: 00-3A-98-78-F8-90
EN
Station
5