Worx WG117E Manual Original página 10

symbols
Read operator's manual
Double insulation
Wear eye protection
Wear ear protection
Keep bystanders away
Switch off! Remove plug from
mains before adjusting, cleaning or
if cable is entangled or damaged.
10
Do not expose to moisture.
This product has been marked
with a symbol relating to removing
electric and electronic waste. This
means that this product shall not
be discarded with household waste
but that it shall be returned to a
collection system which conforms
to the European Directive 2002/96/
CE. It will then be recycled or
dismantled in order to reduce the
impact on the environment. Electric
and electronic equipment can be
hazardous for the environment
and for human health since they
contain hazardous substances.
2-in-1 Grass Trimmer/Edger
All manuals and user guides at all-guides.com
Edging
Trimming
assEmbly
1. ASSEMBLy OF THE SAFETy GuARD
(See Fig. A)
Remove the screw from the Safety Guard (4)
and fit the guard to the trimmer head; align
the guard so it slides into the slots located
on the trimmer head. Turn the tool over and
secure the Safety Guard onto the trimmer
head with the screw (a) provided.
2. ASSEMBLy OF THE EDGER wHEEL
(See Fig. B)
With the tool right side up, slide the Edger
Wheel (8) assembly onto the metal plate
located on the side of the trimmer head.
Make sure the grooves of the Edger Wheel
assembly lock onto the metal plate; you will
hear it click into place.
To remove the wheel assembly, press the
release button (b) on the wheel and pull the
wheel assembly upward.
3. FITTING THE AuxILIARy HANDLE
(See Fig. C1, C2)
NOTE: THE AuxILIARy HANDLE MuST
BE ATTACHED to the trimmer shaft
before use.
wARNING: To avoid injury, ALwAyS
turn off and disconnect the
trimmer from the power outlet BEFORE
installing parts or cleaning the trimmer
or making any adjustments.
1) Disconnect the trimmer from the power
supply.
2) Unscrew the auxiliary handle's tightening
knob (counter-clockwise) and remove from
handle.
3) Position auxiliary handle onto handle
bracket assembly located on trimmer's
top-shaft (See Fig. C1).
4) Position the knob and screw through the
auxiliary handle and bracket, and tighten
knob (turn clockwise). (See Fig. C2) Do not
tighten completely until you have adjusted
the auxiliary handle to your desired
working position.
En