Mode Button - Thrustmaster T248 Manual Del Usuario

MODE BUTTON

DISPLAYING INFORMATION ON THE RACING WHEEL, AND CONFIGURING THE RACING WHEEL AND PEDAL
SET
Press the MODE button (9) to enter the MODE menu.
Only the first two segments are displayed when you are in this menu.
Use the directional buttons (7) in this menu as follows:
Navigation
3 options
3 displays
3 options
7 levels
6 options
2 options
1 display
PS/PC
Select your system:
PS4™ console,
PS5™ console or PC
ABOUT
General information
FFB
Select the Force
Feedback profile (see
FFB PROFILE
DIAGRAM section)
ROT°
Select the angle of
rotation
(only for games in
which the angle of
rotation is not
automatic)
PEDAL
Select the pedal set
configuration
TEMP
Motor temperature
RESET
Reset the racing
wheel to default
mode.
1 option
15/30
Screen Information / Options
- Selection of PS4™ console (by
default)
- Selection of PS5™ console
- Selection of PC
Note: To validate your system
choice, press the MODE button
(9). Selection will be saved when
EXIT appears on screen.
- Firmware version of racing
wheel base
- Name of device connected to
mini-DIN connector (23)
- Type of pedal set connected to
RJ12 connector (24)
- FFB 1
- FFB 2 (by default)
- FFB 3
- 270°
- 360°
- 540°
- 720°
- 900°
- AUTO = Automatic (by default)
- FLOOR: floor position (by
default)
- INV.: suspended position
(the accelerator and clutch
pedals are reversed)
Racing wheel's motor temperature
displayed in real time
- N: No
- Y: Yes
Select Y, then press the MODE button
(9). The racing wheel is reset when
EXIT appears on screen.