Transport And Storage - FITFIU FITNESS RA-300 Manual Usuario

TROUBLESHOOTING
The following information may assist in identifying a problem and rectifying it.
Problem
The display does not show
anything
The machine wobbles when in use.
Rowing machine makes a
squeaking noise when in use

TRANSPORT AND STORAGE

To move the machine, take out knob (26) and washer (27), then lift the sliding rail (30) by one hand to a vertical angle.
When the sliding rail (30) in a vertical angle, fix sliding rail (30) into the main frame with knob (26) and washer (27) . With the
wheels (13+22) on the ground, you can transport the machine to the desired location with ease.
ATTENTION: Be careful when folding the rail vertically, its head may touch the stabiliser of the rear
support.
Remove the console from the computer and check that the cable coming out
of the computer console is properly connected to the cable coming out of the
handlebar post
Check that the batteries are correctly inserted and that the battery springs
are in good contact with the batteries
The batteries in the computer console may be dead. Replace the batteries
with new ones
Turn the knob on the rear stabiliser end as necessary to level the rowing
machine
Bolts may be loose on the rowing machine. Inspect all bolts and tighten any
loose bolts
44
Solution