Electrical Wiring; Replacement Parts - ECCOTEMP EL5 Manual Del Usuario

Ocultar thumbs Ver también para EL5:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Electrical Wiring

This connection is for low-voltage batteries or direct current only. Do not connect 120 or 240 volts AC.
Temperature sensor
Battery box
NOTICE - If any of the original wire as supplied with the appliance shall be
replaced, it shall be replaced with the original type wire or its temperature
equivalent.

Replacement Parts

For more available parts for your Eccotemp Water Heater and to
purchase, visit www.eccotemp.com/parts or call 1-866-356-1992.
REPLACEMENT PART
PLEASE NOTE: THIS MODEL IS NOT RECOMMENDED, NOR HAS IT BEEN TESTED FOR ANY PERMANENT OR INDOOR INSTALLATION. THIS
MODEL IS PART OF OUR PORTABLE, OUTDOOR SERIES AND NEEDS TO BE TAKEN DOWN AND STORED IN A WARM, DRY PLACE AFTER EVERY
USE. THIS MANUAL AND ALL ECCOTEMP CONTENT IS SUBJECT TO CHANGE WITHOUT NOTICE. VISIT SUPPORT.ECCOTEMP.COM FOR THE
18
Support: Support.Eccotemp.com
C
US
Ignition pin
Display
On/Off Switch
Solenoid
Micro switch
SKU
Shower
Nozzle
502024
and Hose
1/2" NPT
to Garden
502028
Hose
Adapter
Gas Hose
and
502005
Regulator
LATEST VERSION OF THE MANUAL AND WARRANTY.
Shop Online: Eccotemp.com
Sensor pin
HV1
HV2
S
CAUTION: Label all wires prior to
disconnection when servicing controls.
Wiring errors can cause improper and
dangerous operation.
REPLACEMENT PART
Store Locator: Eccotemp.com/locator
Ignition controller
Ground wire
Over temp sensor
SKU
Hardware
201032
Pack
Pressure
Relief
JPRV12
Valve
Battery
Box and
501026
Control
Pack

Publicidad

Tabla de contenido
loading

Tabla de contenido