mega macs 56
2 Safety Precautions
2.1
Safety Precautions – Risk of Injury
EN
2.2
Safety Precautions for the mega macs 56
30
When working on the vehicle, there is a risk of injury through rotating parts or rolling of the
vehicle. Therefore observe the following:
•
Protect vehicle against rolling away.
•
Additionally place gear selector lever of AT vehicles to park position.
•
Deactivate the start/stop system to avoid an inadvertent engine start.
•
Connect the device to the vehicle only when engine is shut down.
•
Do not reach into rotating components when engine is running.
•
Do not run cables near rotating parts.
•
Check the high-voltage parts for damage.
To prevent incorrect handling and resulting injuries to the user or destruction of the device, pay
attention to the following:
•
Select functions and menus on the touch screen display only with clean fingers. Do not use
implements such as a screwdriver.
•
Only connect original power adapter to the power cord (supply voltage 10–15 V).
•
Protect the TFT LCD and the device from long periods of exposure to solar radiation.
•
Protect the device and the connecting cable from hot components.
•
Protect the device and the connecting cables from rotating parts.
•
Regularly check the connecting cables/accessory parts for damage (destruction of the device
due to short circuit).
•
Connect the device exclusively according to user manual.
•
Keep the device away from fluids such as water, oil or gasoline. The mega macs 56 is not
waterproof.
•
Protect the device from strong impacts and do not drop it.
•
Do not open the device on your own. Only technicians authorized by Hella Gutmann are
allowed to open the device. Warranty and guarantee will be rendered void at any case of
unauthorized tampering of the device or if the protective seal is damaged.
•
Immediately contact Hella Gutmann or a Hella Gutmann trading partner in case of any
malfunctions.
Safety Precautions
Safety Precautions – Risk of Injury