Use proper safety clothing and devices when operating the machine (, safety
goggles, ear protectors, safety shoes ...)! Do not wear safety gloves for oper-
ating because they decrease the working accuracy and they might be pulled
into the saw blade.
Before any maintenance you have to disconnect the panel saw from the pow-
er source. Never use the plugged cable for transporting or manipulating the
machine.
12.4 General rules of security
•
Keep the workshop clean: It's easy to cause accidents if the workshop is in mess.
•
Don't allow strangers and children to be close to the workshops:
•
Keep tools carefully: Unused tools should be kept in dry and high places where children's
hands couldn't reach to, please lock them if it's necessary.
•
Be careful to choose tools: Don't use small tools or accessories to finish burdensome jobs.
•
Maintain tools very carefully: Keep cleaning in order to make them perform fully.
•
Keep vigilance: Keep your brain sober when working. Don't operate dynamoelectric tools
when feeling tired.
•
Check broken parts and accessories: Operators should carefully check whether every part,
every accessory or every protecting equipment has been broken before intermittently us-
ing tools in order to decide whether such objects perform again.
•
Advise: It's easy to cause broken tools, even personal hurt if you don't use accessories
from original Company.
12.5 Product specific rules of security
•
Read the operation manual before operating this machine.
•
The machine should be disconnected from the power source before performing mainte-
nance or adjustments to the internal mechanisms, or when making repairs.
•
Before leaving the machine, make sure the work area is clean.
•
Check timber for loose knots, nails, or other items which may cause a hazard or affect the
machine's performance.
•
Keep all guards in place and in working order.
•
Do not force the machine. It will do the job better and be safer working at the rate for
which it was designed.
•
All children and visitors should be kept a safe distance from the working area.
•
The operator should keep proper footing and balance at all times.
•
Do not operate the machine while under the influence of drugs, alcohol, or any other med-
ication.
•
Avoid awkward operations and hand positions where a sudden slip could cause your hand
to move into the sanding drum.
•
Never leave the machine until it comes to a complete stop, and never leave the machine
running unattended.
•
The employer is responsible for selecting competent and qualified employees.
•
Safety shoes should be worn to provide protection against rolling objects, falling objects,
and sharp edges in the workplace.
•
Eye protection should be worn and such devices should be carefully selected, fitted and
used. Compulsory wearing of glasses with impact resistant lenses and side shields is a
good safety policy.
•
Wear hearing protection when operating the machine.
•
Do not wear rings, necklaces or jewelry around moving machinery.
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
Lijadora de rodillos / mini wide belt sander ZS640P/ZS970P
Página 23