SEA PALM Manual Del Usuario página 13

SEA S.r.l.
DIREZIONE E STABILIMENTO:
Zona industriale 64020 S.ATTO Teramo - (ITALY)
Sistemi elettronici
Tel. 0861 588341 r.a. Fax 0861 588344
di Aperture Porte e Cancelli
TERMINAL FOR THE CODE ADMINISTRATION
The Palm terminal has been projected and developped by SEA purposely
to help the installer through all the operations of new installations and /or
maintenance of the radio smart e-copy.
In a Signal receiver ( no matter if connected on the control unit or if for
external Box), all the authorized codes are inside its memory module.
When this memory module is pulled out from the receiver and inserted in
the special connector of the terminal, it can be read, wrote or modified etc.
The memory of the receiver includes also special datas concerning the
installation: installer code (password) and the installation code;
Whereas on the terminal it is possible to set the reception frequency of
the terminal (433MHz, 868MHz), the switch off time of the terminal when
not used and the choice of the language.
5
4
English
CODES SMART E-COPY
Legend
1 Display
2 Membrane keypad
1
3 Connector for the memory plug-in
4 External current supply 12Vdc socket
5 Rs232 connector for the connection to the PC
Contents of the accessories case
- 12Vdc transformer for the current supply of
the terminal when batteries are
not included
2
- RS 232 cable fo the connection to the PC
CD ROM (23105280) optional accessory
-
Software for the PC codes adminstration
Description of the functions
- Detailed users adminstration: name,
surename, complete address
3
- Insertion, modification or erase users
- Administration of installation archives
- prints
Rev. 04 - 09/2007
http://www.seateam.com
e-mail:seacom@seateam.com (Uff. Comm.le)
2