SEA PALM Manual Del Usuario página 17

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

SEA S.r.l.
SEA S.r.l.
DIREZIONE E STABILIMENTO:
DIREZIONE E STABILIMENTO:
Zona industriale 64020 S.ATTO Teramo - (ITALY)
Zona industriale 64020 S.ATTO Teramo - (ITALY)
Sistemi elettronici
Tel. 0861 588341 r.a. Fax 0861 588344
Tel. 0861 588341 r.a. Fax 0861 588344
di Aperture Porte e Cancelli
ADMINISTRATION OF THE INTERNAL MEMORY OF THE TERMINAL
The Terminal has a memory which can administrate up to 14 installations with 800
users for each installation. Hereafter are reported the modalities of reading, writing,
memorizing and erasing the datas which are present in every installation.
TYPING IN
SEQUENCE
A-C-A
A-C-B
A-C-C
A-C-D
N.B. Each of the 14 possible installations which are present on the terminal can
be memorized into a memory module of a receiver in the following way:
A-C-A to choose the installation then press ENT
B to eventually modify then press ENT (only if necessary)
C to memorize the modifications of the installation in the memory of the
terminal, then press ENT after having reselected the number of installation in
which the modification has been made (only if B has been pressed before
(line above) )
ESC-B-C to write this installation into the memory module, only after having inserted
the memory modul of the receiver into the MEMORY slot.
DIGITING
SEQUENCY
A-D
A-D-(A/B)
DESCRIPTION OF THE OPERATIONS
Allows to choose the installation and pressing pushbutton ENT it is
possible to reading the datas of that installation.
Allows to codify the datas of the installation just read through
digitation of A-C-A .
Allows to write the datas, just modified through digitation of A -C -B,
into the memory module.
Delets all the datats of the installation which has been read
through digitation A-C-A.
GATE ADMINISTRATION
DESCRIPTION OF THE OPERATIONS
Inserting the EEPROM into the special slot, it allows to read the
functioning parameters which have been adjusted on the installation.
Allows to slide over the parameters and to eventually modify them
pressing ENT and digiting the desired value.
To exit without making modifications press ESC twice.
http://www.seateam.com
http://www.seateam.com
e-mail:seacom@seateam.com (Uff. Comm.le)
e-mail:seacom@seateam.com (Uff. Comm.le)
English
Rev. 04 - 09/2007
6

Publicidad

Tabla de contenido
loading

Productos relacionados para SEA PALM

Este manual también es adecuado para:

23105275

Tabla de contenido