Battery Safety - MasterChef VRD919102100 Manual Del Usuario

• Do not expose to water, direct heat or sunlight.
• Batteries should be disposed of in a responsible manner.
• If the device is not going to be used for a prolonged period, such as over 6 months,
remove battery.
• Operate device to measure temperatures within probe specification temperature
range for satisfactory and suitable results. Avoiding in doing so will diminish lifetime
and product accuracy.
• For household use only.
• Not suitable for industrial or commercial use.
• Measurement temperature is for reference only.
• Save these instructions for future reference.
State of California Proposition 65 warnings;
• WARNING: This product contains one or more chemicals known to the State of
California to cause cancer.
• WARNING: This product contains one or more chemicals known to the State of
California to cause defects or other reproductive harm.

BATTERY SAFETY

• Use only the batteries mentioned in the manual.
• Do not use old and new batteries together.
• Do not use batteries of different types or brands.
• Do not install batteries in reverse polarity.
• Do not short-circuit or disassemble the batteries.
• Do not expose the batteries to water.
• Do not expose the batteries to fire or excessive heat.
• Batteries are prone to leakage when fully discharged. To avoid damage to the product,
remove the batteries when leaving the product unattended for longer periods of time.
If liquid from the batteries comes into contact with skin or clothing, immediately rinse
with fresh water.
SAVE THE INSTRUCTIONS
EXPLANATION SYMBOLS
Read operations manual.
This product is safe to be used in
contact with food.
Declaration of Conformity. Products
marked with this symbol comply of
the European Economic Area. The
EU Declaration of Conformity can be
requested from the manufacturer.
- 3 -
If you notice any transport damage
when unpacking the product, please
contact you dealer without delay.
The packaging can be reused or
recycled. Please dispose properly
of any packaging material no longer
required.
This symbol indicates that the power
input/output for the product is
direct current.