Publicidad
Idiomas disponibles
Idiomas disponibles
When supplied from the factory, all
lisa RF time are set to channel 0. It is
only necessary to set units to other
channels if you have several different
users operating units in the same
building.
Set the required channel by using a
small screwdriver to turn the channel
selector switch, which is located on the
lower side of the clock, to the required
Transmission Signal Recognition
The lisa RF time converts the various transmission signals into varying sequen-
ces of vibrating and signal displays.
Telephone:
Vibration
Door I:
Vibration
Door II:
Vibration
Baby monitor:
Vibration
Call button:
Vibration
10 English
Telephone LED lights
Door LED lights
Door LED flashes
Baby LED lights
Call button LED lights
channel number. Use a small screw-
driver to adjust this switch.
All transmitters and receivers must be
set to the same channel.
Publicidad
