Skoda 3V0 071 004 Manual Del Usuario página 9

Chrome strip of the front bumper
The accessories are intended for professional fitting. ŠKODA AUTO recommends that they are
fitted by a contractual partner.
The component is manufactured from acrylonitrile butadiene styrene (ABS).
The chrome strip for the front bumper (order no. 3V0 071 004) is designed for the
Superb (3V).
Component index for the set (fig. 1)
Component
Chrome strip for the centre of the front bumper
Chrome strip for the left-hand side of the front bumper
Chrome strip for the right-hand side of the front bumper
Fitting instructions
Note
The adhesive sealant is not contained in the set and must be ordered separately in ac-
cordance with the workshop's practices.
From the ŠKODA Original Accessories range:
Terostat MS 9360 adhesive sealant (D)
Tool list
Terostat 8550 cleaning agent (Henkel)
Body tape
Important fitting information
Please note: The vehicle must be completely clean.
In order to correctly adhere the front bumper chrome strips (hereafter simply referred to as
"strips") to the vehicle, the ambient temperature, the vehicle temperature and the temper-
ature of the components to be adhered must be between 18 and 30 °C. Protect the compo-
nents from direct sunlight (fig. 1).
Caution: When adhering the strips, ensure that the work area is
adequately ventilated – the cleaning agents contain dangerous
fumes.
Before you begin adhering the strips, check that they are correctly positioned on the front
bumper. The outline of the strips' contact surface must follow the shape of the front bump-
er's surface.
Quantity
1
1
1
1
order no. 5L0 071 780
EN
Item
A
B
C
9