Adler europe AD 1184 Manual De Uso página 6

2, Press PRESET (A10) button to go to the stored Radio station list, then press TUN (A5) (A4) button to select your
desired station and press SELECT/SCAN (A3) button to play.
3, Long press PRESET (A10) button to PRESET (A10) current radio station to the stored radio station list, press TUN (A5) (A4) button
to select the list number you want to PRESET (A10), then press SELECT/SCAN (A3) button to confirm.
5, Short press TUN (A5) (A4) button to adjust radio frequency 0.05MHz each time. Long press TUN (A5) (A4) button to automatic
searching next/previous radio station.
6, Long press shortcut key 1/2/3 (A7, A8, A9) to PRESET (A10) current FM radio station to favorite list 1/2/3 (A7, A8, A9); Short press
shortcut key 1/2/3 (A7, A8, A9) to play stored favorite FM station 1/2/3 (A7, A8, A9) directly.
Bluetooth music play
1, Press SOURCE (A6) button to switch to BT mode.
2, Use your Bluetooth transmitting device, turn on the Bluetooth function, search for "AD 1184" and click it to connect.
3, Once connect successfully, it will show "BT Connected" on display. Then play music from your device.
4, Press SELECT/SCAN (A3) button to play or pause the music. Press TUN (A5) (A4) button to go previous or next songs.
5, Turn VOLUME (A11) knob to adjust the VOLUME.
USB / micro SD music play
1, Insert USB flash drive/micro SD card, then press SOURCE (A6) button to switch to USB/SD mode to play music from USB/ micro SD.
(Largest capacity of USB/ micro SD the device can support: 32GB).
2, Turn VOLUME (A11) knob to adjust the VOLUME.
3, Press TUN (A5) (A4) button to go previous or next songs..
4, Press SELECT/SCAN (A3) button to play or pause the music.
Time / Date Setting
A- If DAB available, under DAB mode, the device will automatically synchronize the local time.
B- Manual clock setting :
1, Long press Info / Menu (A2) button to enter Menu, press TUN (A5) (A4) button to select System submenu.
Press SELECT/SCAN (A3) button to enter System submenu
2, Press SELECT/SCAN (A3) button to select and enter Time/Date setting: Date - Month - Year- Hour - Minute
( press TUN (A5) (A4) button to adjust the numbers , press SELECT/SCAN (A3) button to confirm and go to next.)
3, After setting, it will return to Time and date menu automatically. Press Info / Menu (A2) to return.
Alarm clock Setting
This device can set 2 sets of alarms, operation as below:
1, Long press Info / Menu (A2) button to enter Menu, press TUN (A5) (A4) button to select System submenu.
Press SELECT/SCAN (A3) button enter System submenu, press TUN (A5) (A4) button to select Alarms submenu
Press SELECT/SCAN (A3) button again to enter Alarms setting , and press TUN (A5) (A4) button to select Alarm1 / Alarm2:
.
2, Press SELECT/SCAN (A3) button to enter Alarm setting: ON/OFF - Alarm time - Alarm SOURCE (A6) - Repeat -
Alarm VOLUME (A11) - Alarm duration. ( Press TUN (A5) button to select, press SELECT/SCAN (A3) to confirm and go to next. )
Alarm SOURCE (A6): Buzzer / FM / DAB
Repeat: Once / Daily / Weekends / Weekday
Alarm duration: 15 Minutes / 30 Minutes / .... / 2 Hours
3, After alarm setting, it will exit Menu setting automatically.
4, When the alarm clock rings, press any other button (except VOLUME (A11) button ) to activate snooze function. After 5 min, the alarm
clock will go off again.
5, Press VOLUME (A11) button to shut down the Alarm clock.
Sleep Timer
1, Long press Info / Menu (A2) button to enter Menu, press TUN (A5) (A4) button to select System submenu.
Press SELECT/SCAN (A3) button enter System submenu, press TUN (A5) (A4) button to select Sleep submenu
Press SELECT/SCAN (A3) button to enter Sleep Timer setting.
2, Press TUN (A5) (A4) button to select Sleep OFF/ Sleep 15 minutes / ... / Sleep 1 Hour 30 minutes.
- " Sleep 15 minutes": Device automatically goes into standby mode after 15 minutes .
- " Sleep 30 minutes": Device automatically goes into standby mode after 15 minutes .
- "Sleep 1 Hour 30 minutes": Device automatically goes into standby mode after 90 minutes .
- "OFF" : Sleep timer function turned off.
3, Press SELECT/SCAN (A3) button to confirm sleep timer setting.
Technical Data:
Input voltage: 220-240V ~ 50/60Hz
Output Voltage: DC 5V ⎓ 1.2A
DAB: 174 -240 MHZ
6