Operating Instructions; Product Description; Product Usage - Kunft KDD4870 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

2. OPERATING INSTRUCTIONS

2.1. Product Description

Description
View of the appliance
of the appliance
1. Freezer shelf
2. Controller box and LED
3. Refrigerator shelf
4. Vegetable drawer cover
5. Vegetable drawer
6. Adjustable feet
7. Freezer door
8. Upper door shelf
9. Middle door shelf
10. Lower door shelf
11. Refrigerator door
Note: Due to constant development of our products, your refrigerator
may be slightly different from this instruction manual, but its functions
and usage remain the same. To get more space in freezer, you can
remove freezer shelves.

2.2. Product usage

Installing the appliance
Before using the appliance for the first time, you should review the
following tips.
Ventilating the appliance
In order to improve the cooling system's efficiency and save energy,
it is necessary to maintain a good ventilation around the appliance.
For this reason, sufficient clear space should be available around the
refrigerator.
It is advisable to keep at least a 50-70mm space between the back
of the appliance and the wall, at least 100 mm from its top, at last
100 mm between the sides and the walls and a clear space in front
to allow the doors to open 135°. Please see the following diagrams.
20
refrigerator freezer
Climate class
SN
N
ST
T
• Place your appliance in a dry place to avoid moisture damage.
• Keep the appliance out of direct sunlight, rain or frost. Place the
appliance away from heat sources such as stoves, fires or heaters.
Levelling the appliance
• For sufficient levelling and air circulating in
the lower rear section of the appliance, the
feet may need to be adjusted.
• You can adjust them manually using a sui-
table spanner.
To allow the doors to self-close, tilt the top
backwards about 10 mm.
Using your appliance
Accessories 1)
Movable shelves / trays
• Various glass, plastic storage shelves or
wire trays are included with your appliance
- different models have different combina-
tions and different features.
• The walls of the refrigerator are equipped
with a series of runners so that the shelves
can be positioned as desired.
Removing and installing the door shelf
Warning: The door shelf must not be removed and installed by the
user! If the door shelf is damaged, contact the Customer Support Ser-
vice for assistance. To replace the door shelf, follow the steps below:
EN
KDD4870
Note:
This appliance performs well wi-
thin the climate class from N to ST
showed in the table below.
It may not work properly if left at
a temperature above or below the
indicated range for a long period.
Ambient temperature
+10° C to +32° C
+16° C to +32° C
+16° C to +38° C
+16° C to +43° C
21

Publicidad

Tabla de contenido
loading

Tabla de contenido