En Original Instructions; Initial Operation - Metabo SRE 4350 TurboTec Manual Original

Original instructions
1. Declaration of Conformity
We declare under our sole responsibility: These
orbital sanders, identified by type and serial number
*1), comply with all relevant requirements of the
directives *2) and standards *3). Technical file at *4) -
see page 3.
2. Specified Use
The machine is suitable for dry sanding of flat and
elliptical surfaces, wood, plastics, non-ferrous
metals, sheet metal and similar filled and painted
surfaces.
The user bears sole responsibility for any damage
caused by improper use.
Generally accepted accident prevention regulations
and the enclosed safety information must be
observed.
3. General Safety Instructions
For your own protection and for the protec-
tion of your power tool, pay attention to all
parts of the text that are marked with this
symbol!
WARNING – Reading the operating instruc-
tions will reduce the risk of injury.
WARNING Read all safety warnings and
instructions. Failure to follow all safety warn-
ings and instructions may result in electric shock, fire
and/or serious injury.
Keep all safety instructions and information for
future reference.
Pass on your electrical tool only together with these
documents.
4. Special Safety Instructions
Pull the plug out of the socket before making any
adjustments, changing tools, carrying out
maintenance or cleaning.
Secure the workpiece against slipping, e.g. with the
help of clamping devices.
Wear ear protectors when working for long
periods of time. High noise levels over a
prolonged period of time may affect your hearing.
Hold the machine from the handles provided.
Reducing dust exposure:
Some of the dust created using this power tool
may contain substances known to cause
cancer, allergic reaction, respiratory disease, birth
defects or other reproductive harm. Some
examples of these substances are: lead (from lead-
based paints), crystalline silica (from bricks cement,
etc.), additives for wood treatment (chromate, wood
preservative), some types of wood (like oak and
beech dust), metals, asbestos.
The risk from exposure to such substances will
depend on how long the user or nearby persons are
being exposed.
Do not let particles enter the body.
To reduce exposure to these substances: work in a
well ventilated area and wear protective equipment,
such as dust masks that are specially designed to
filter out microscopic particles.
Observe the relevant guidelines for your material,
staff, application and place of application (e.g.
occupational health and safety regulations,
disposal).
Collect the generated particles at the source, avoid
deposits in the surrounding area.
Use only suitable accessories. In this way, fewer
particles enter the environment in an uncontrolled
manner.
Use a suitable extraction unit.
Reduce dust exposure with the following measures:
- Do not direct the escaping particles and the
exhaust air stream at yourself or nearby persons
or on dust deposits.
- Use an extraction unit and/or air purifiers.
- Ensure good ventilation of the workplace and
keep it clean using a vacuum cleaner. Sweeping
or blowing stirs up dust.
Vacuum or wash protective clothing. Do not blow,
beat or brush.
5. Overview
See page 2.
1 Additional handle (removable)
2 Setting wheel for selecting oscillating frequency
3 TurboBoost switch
4 Lock button for continuous activation
5 Trigger
6 Handle
7 Ejection nozzle
8 Dust bag
9 Closure band
10 Sanding sheet *
11 2 clamping elements
12 Sanding plate
* depending on equipment/not in scope of delivery

6. Initial Operation

Before plugging in the device, check to see that
the rated mains voltage and mains frequency,
as specified on the rating label, match your power
supply.
Always install an RCD with a maximum trip
current of 30 mA upstream.
6.1 Additional handle (removable)
If necessary, you can unscrew the additional handle
(1) (right-hand thread).
ENGLISH en
7