Publicidad
Step 16
With someone's help, carefully position the 109872 U-Shaped Connector
å
Kit next to the 109843 Executive Desk as shown in the diagram.
Fasten both CONNECTOR PLATES (O) to the bottom of the MOLDINGS
å
on the U-Shaped Connector Kit and Desk. Use eight BLACK 9/16" LARGE
HEAD SCREWS (BB) through each PLATE and into the pre-drilled holes in
the MOLDINGS.
Now, fasten the MODESTY PANEL (F) to the Inner End on the Desk. Use
å
three BROWN 1-1/2" FLAT HEAD SCREWS (Y) with WASHERS (V) through
the holes in the MODESTY PANEL and into the pre-drilled holes in the
Inner End on the Desk.
IMPORTANT: The 109872 U-Shape Connector Kit must be attached to the
å
109843 Executive Desk as indicated in this step.
(3 used for the MODESTY PANEL)
Page 20
Return Kit on the RIGHT
109843
Executive Desk
Fasten the MODESTY PANEL (F)
along this edge of the Inner End
on the 109843 Executive Desk
using three 1-1/2" FLAT HEAD
SCREWS (Y) and WASHERS (V).
V
BLACK 9/16" LARGE HEAD SCREW
(16 used for the PLATES)
E2
F
Y
BROWN 1-1/2" FLAT HEAD SCREW
(3 used for the MODESTY PANEL)
109872
BB
O
109872
U-Shape
Connector Kit
www.sauder.com/services
Publicidad
