Faucet Installation - Price Pfister Skye 42 Manual Del Usuario

Thank you for purchasing this Price Pfister product. All Price Pfister products are
carefully engineered, and factory tested to provide long trouble-free use under normal
conditions. This product is easy to install using basic tools and our easy to follow
illustrated instructions. If you have any questions regarding this product, call 1-800-
Pfaucet (1-800-732-8238).
1 BEFORE PROCEEDING
WARNING: Read all the instructions completely before proceeding. Price Pfister
recommends calling a professional if you are uncertain about installing this product!
This product should be installed in accordance with all local and state plumbing and
building codes.
2
2 SHUT OFF WATER SUPPLY
Locate water supply inlets and shut off the water supply valves. These are usually found
under the sink or near the water meter. If you are replacing an existing faucet, remove
the old faucet from the sink and clean the sink surface thoroughly.
3
3 TOOLS RECOMMENDED
• Plumber's putty • Slotted screwdriver
• Pliers • Flashlight
Your installation may require new supply lines and / or shut-off valves or other additional
tools.
4
A
B
C
4 CHECKING THE CONTENTS OF THE BOX
Upon opening the box, check to ensure that all of the following items are included.
A Spout Body B Pop-Up Assembly
D Long Nut E Mounting Washer
G Deckplate H Putty Plate
If any of these items are missing, please contact Price Pfister Consumer Service at
1-800-Pfaucet (1-800-732-8238).
ENGLISH
• Adjustable wrench
• Cloth
F
G
E
H
D
C Pop-Up Rod
F Seal Base

FAUCET INSTALLATION

5
5 INSTALLING FAUCET WITH SINGLE HOLE MOUNTING
Place a bead of plumber's putty in the groove along the bottom outer edge of Base Plate
(5A). Place Base Plate (5A) under base of Spout Body (5B). From above sink, insert
Threaded Shank (5C) and Supply Tubes (5D) through hole (5E) on sink.
6
6A
BOTTOM GROOVE
6 INSTALLING FAUCET WITH DECKPLATE
Ensure that the Plastic Putty Plate (6A) is pressed on the Deckplate (6B). Place a bead
of plumber's putty in the groove along the outer edge of the Putty Plate (6A). Assemble
Deckplate (6B) and Putty Plate (6A) to Spout Base (6C). With spout facing forward,
carefully install the Faucet Supply Hoses (6D) through the Center Hole of sink (6E).
2
5B
5C
5A
5D
5D
5E
6B
6A
6D
6E
6C