Important Safety Instructions; Installation Instructions; Electrical Connection - Premium PWC167MB Manual Del Usuario

Ocultar thumbs

Contenido

Tabla de contenido



WARNING

 Read all instructions before using the Wine/Beverage Cooler.

 DANGER or WARNING: Risk of child entrapment.

 Child entrapment and suffocation are not problems of the past. Junked or abandoned

appliances are still dangerous . . . even if they will "just sit in the garage a few days".

 Before you throw away your old Wine/Beverage Cooler: take off the doors. Leave

the shelves in place so that children may not easily climb inside.

 Never allow children to operate, play with, or crawl inside the Wine/Beverage

Cooler.

 Never clean Wine/Beverage Cooler parts with flammable fluids. The fumes can

create a fire hazard or explosion.

 Do not store or use gasoline or any other flammable vapors and liquids in the vicinity

of this or any other appliance. The fumes can create a fire hazard or explosion.

 Before Using Your Wine/Beverage Cooler

 Remove the exterior and interior packing.

 Before connecting the Wine/Beverage Cooler to the power source, let it stand upright

for approximately 2 hours. This will reduce the possibility of a malfunction in the

cooling system from handling during transportation.

 Clean the interior surface with lukewarm water using a soft cloth.

 Installation of Your Wine/Beverage Cooler

 This appliance is designed to be free standing only, and should not be recessed or

built-in (fully recessed).

 Place your Wine/Beverage Cooler on a floor that is strong enough to support it when it

is fully loaded. To level your Wine/Beverage Cooler, adjust the adjustable leg at the

bottom of the unit.

 Allow 5 inches of space between the back and sides of the unit, which allows the

proper air circulation to cool the compressor.

 Locate the Wine/Beverage Cooler away from direct sunlight and sources of heat

(stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat

sources may increase electrical consumption. Extreme cold ambient temperatures may

also cause the unit not to perform properly.

 Avoid locating the unit in moist areas.

 Plug the Wine/Beverage Cooler into an exclusive, properly installed-grounded wall

outlet. Do not under any circumstances cut or remove the third (ground) prong from

the power cord. Any questions concerning power and/or grounding should be directed

toward a certified electrician or an authorized Avanti Products service center.

 After plugging the appliance into a wall outlet, allow the unit to cool down for 2-3

hours before placing items in the compartment.

 Electrical Connection

All manuals and user guides at all-guides.com