Technical Specifications; General Specifications; Measurement Specifications - Bahco BDACM1000 Manual Del Usuario

Keypad
FUNC.
Press to select the second function in the same rotary switch position.
RANGE
Ω
On V~, V , , A, mA and μA.
1. Press RANGE to enter manual range mode.
2. Press RANGE to step through the ranges available for the selected
function.
3. Press and hold RANGE for 2 seconds to return to autorange mode.
MAX/MIN
This key is for measuring maximum and minimum values.
1. Press to enter Max/Min mode.
2. Press again; the LCD displays the maximum value.
3. Press again; the LCD displays the minimum value.
4. Press and hold for 2 seconds to return to normal measurement mode.
(Except Hz/Duty and capacitance)
Press to enter or exit Data Hold mode. Press and hold 2 seconds to switch
on the backlight, or press and hold for 2 seconds to switch off the backlight.

TECHNICAL SPECIFICATIONS

General specifications
Environment conditions:
1000V CAT II and 600V CAT III
Pollution degree: 2
IP rating: 20
Altitude: <2000 m
Operating temperature:
0~40 ºC / 32~122 ºF (<80% RH, <10 ºC non-condensing)
Storage temperature:
-10~60 ºC /14~140 ºF (<70% RH, battery removed)
Temperature coefficient:
0.1 x (specified accuracy) / ºC (<18 ºC or >28 ºC)
Max. voltage between terminals and ground:
1000V AC RMS or 1000V DC
Sample rate:
3 Hz for digital data
Display:
3-3/4 digit LCD display with automatic indication of functions and symbols
Range selection:
automatic or manual
Overrange indication:
LCD displays " "
Low battery indication:
displayed when the battery is below the normal range
Polarity indication:
"–" displayed automatically
Power source: 4.5V
Battery type: 3x AAA
Measurement specifications
Accuracy is specified for one year after calibration, in the operating
temperature range 18 ºC to 28 ºC with relative humidity less than 80%.
Accuracy specifications take the form of: ±(% of reading + number of least
significant digits).
EN
5